Tomytec Drive for Cincinnati Curved Side Cars

How to adapt a Tomytec TM-TR04 drive for Cincinnati Curved Side cars ( Speedrail, Dayton & Troy, ...)

Available here: https://interurban-models.myshopify.com/collections/n-scale-interurban-cars

1/ Modify the elongation of the drive to the maximum of 49 mm truck centers

2/ Select the short platform (S) extensions from the Tomytec add-ons

3/ Glue the pilot to one platform, put a weight in the second platform

4/ Clip the platforms into the drive, motor truck on rear.

5/ Choose truck frames KS45L or Brill (none is prototypical, but you wont detect it ...)

6/ Bend the dummy trolley pole up and plug it into the hole in the roof (diameter 1.2 mm)

7/ Clip the body over the drive.

When transporting, hold your hand under the car, the drive can sometimes fall out

Protect from heat and excessive sunlight